­

Thermo-mechanical Creep Simulation

By |October 14th, 2019|

Contacts between dissimilar materials with different coefficient of thermal expansion causes uneven expansion of the components, leading to stress build-ups [...]

Comments Off on Thermo-mechanical Creep Simulation

Cleanroom Airflow CFD Study for Sandisk Storage Malaysia Sdn. Bhd.

By |October 11th, 2019|

A CFD study was carried out to aid in the design of a Class 1000 cleanroom without raised floors. Two [...]

Comments Off on Cleanroom Airflow CFD Study for Sandisk Storage Malaysia Sdn. Bhd.

BOG Heater bypass and outlet lines mixing flow CFD study for Damit Worley Parsons Engineering

By |October 11th, 2019|

Damit Worley Parsons requested a CFD study to determine the required mixing length for achieving a uniform temperature after gas [...]

Comments Off on BOG Heater bypass and outlet lines mixing flow CFD study for Damit Worley Parsons Engineering

Acoustics Measurements at Bruker Malaysia Sdn. Bhd.

By |October 11th, 2019|

Acoustics baseline measurements were carried out for several points within the facility to facilitate the positioning of sensitive equipment within [...]

Comments Off on Acoustics Measurements at Bruker Malaysia Sdn. Bhd.

PCBA Conjugate Heat Transfer Analysis

By |October 11th, 2019|

As part of a thermal fatigue study for a PCB assembly, a conjugate heat transfer CFD analysis using Solidworks Flow [...]

Comments Off on PCBA Conjugate Heat Transfer Analysis

Structural Analysis of LED Package

By |October 9th, 2019|

29 March 2019 - To identify the maximum principal stresses at the interfaces between the components of the package subjected [...]

Comments Off on Structural Analysis of LED Package

Vibration Controlled Pedestals Design, Installation and Commissioning Works for Unisem (M) Berhad

By |July 19th, 2019|

19 July 2019 - Vibration control design,  installation works and commissioning of several pedestals to support vibration sensitive lithography and [...]

Comments Off on Vibration Controlled Pedestals Design, Installation and Commissioning Works for Unisem (M) Berhad

Vibration Monitoring of Hacking Activities at Intel Technology Sdn. Bhd. Penang, PG 2.1

By |July 13th, 2019|

13 July 2019 - Conduct vibration monitoring activity on a hacking site to ensure vibration levels comply to vibration limit [...]

Comments Off on Vibration Monitoring of Hacking Activities at Intel Technology Sdn. Bhd. Penang, PG 2.1

Thermal Structural FEA Analysis for Optocoupler package

By |June 11th, 2019|

11 June 2019 - A thermal structural FEA analysis was carried out on an optocoupler package to assess the behavior [...]

Comments Off on Thermal Structural FEA Analysis for Optocoupler package

Baseline Vibration Monitoring at HP Manufacturing (M), Batu Kawan

By |December 19th, 2018|

19 December 2018 - Conduct vibration monitoring activity on an area proposed for a cleanroom construction with vibration criteria of [...]

Comments Off on Baseline Vibration Monitoring at HP Manufacturing (M), Batu Kawan